Beko Washer — Error Code E03 (UK)

Q: How do I fix the E03 error on a Beko washer?

Try first: Clear the pump filter and hose. Unplug the machine, open the bottom access panel with a tray ready, unscrew the pump filter, remove coins and lint, and straighten the drain hose.

The machine cannot drain within the expected time.

brand Beko appliance Washer market UK component drain pump category drainage severity stop failure

ApplianceDB ranks 2 repairs for this code, led by “Clear the pump filter and hose”. That top fix is a moderate-difficulty DIY job, involving the drain pump. Severity is classified as stop failure — the appliance halts until the fault clears.

Ranked repair steps

1. Clear the pump filter and hose

Unplug the machine, open the bottom access panel with a tray ready, unscrew the pump filter, remove coins and lint, and straighten the drain hose.

moderate · basis: cost ascending

Remedy source: ApplianceCodeHub — Beko Washer E03 Guide (fix layer)

2. Service the drain pump

If draining still fails, have the pump motor resistance measured and the pump replaced if the impeller is jammed or the circuit is open.

professional only · basis: cost ascending

Remedy source: ApplianceCodeHub — Beko Washer E03 Guide (fix layer)

Provenance: facts re-derived from a disclosed repair reference — Whitegoods Help — Beko Washing Machine Error Codes. Meanings and steps are original paraphrase; nothing is reproduced verbatim.