Hoover Washer — Error Code E03 (UK)

Q: How do I fix the E03 error on a Hoover washer?

Try first: Clear the drain filter and hose. Unplug the machine, remove debris from the drain filter behind the lower panel, and check the rear drain hose for kinks or blockages, flushing it if needed.

The machine is not draining within the expected time.

brand Hoover appliance Washer market UK component drain pump category drainage severity stop failure

ApplianceDB ranks 2 repairs for this code, led by “Clear the drain filter and hose”. That top fix is a moderate-difficulty DIY job, involving the drain pump. Severity is classified as stop failure — the appliance halts until the fault clears.

Ranked repair steps

1. Clear the drain filter and hose

Unplug the machine, remove debris from the drain filter behind the lower panel, and check the rear drain hose for kinks or blockages, flushing it if needed.

moderate · basis: cost ascending

Remedy source: ApplianceCodeHub — Hoover Washer E03 Guide (fix layer)

2. Service the drain pump

If water still will not drain, have the impeller checked for free movement, the motor continuity measured, and the pump assembly replaced if faulty.

professional only · basis: cost ascending

Remedy source: ApplianceCodeHub — Hoover Washer E03 Guide (fix layer)

Provenance: facts re-derived from a disclosed repair reference — Whitegoods Help — Hoover Washing Machine Error Codes. Meanings and steps are original paraphrase; nothing is reproduced verbatim.