Miele Washer — Error Code F10 (UK)

Q: How do I fix the F10 error on a Miele washer?

Try first: Restore the water intake. Open the tap fully, confirm flow of at least five litres in fifteen seconds, straighten the inlet hose, and rinse the plastic inlet filter clean.

A water intake fault was detected.

brand Miele appliance Washer market UK component water inlet valve category water_supply severity stop failure

ApplianceDB ranks 2 repairs for this code, led by “Restore the water intake”. That top fix is an easy DIY job, involving the water inlet valve. Severity is classified as stop failure — the appliance halts until the fault clears.

Ranked repair steps

1. Restore the water intake

Open the tap fully, confirm flow of at least five litres in fifteen seconds, straighten the inlet hose, and rinse the plastic inlet filter clean.

easy · basis: cost ascending

Remedy source: ApplianceCodeHub — Miele Washer F10 Guide (fix layer)

2. Replace the inlet valve

If supply and filter check out, have the inlet valve solenoids tested and the valve assembly replaced if defective.

professional only · basis: cost ascending

Remedy source: ApplianceCodeHub — Miele Washer F10 Guide (fix layer)

Provenance: facts re-derived from a disclosed repair reference — Domex UK — Miele Washing Machine Fault Codes. Meanings and steps are original paraphrase; nothing is reproduced verbatim.