Whirlpool Dryer — Error Code F01

Q: How do I fix the F01 error on a Whirlpool dryer?

Try first: Reset, then have the control board checked. Cut power at the plug or breaker for at least five minutes, restore it and start a timed dry cycle; if F01 returns, a technician should inspect the main control board and its wiring and test the door switch.

The primary control board failed.

brand Whirlpool appliance Dryer market US component control board category control_board severity stop failure

ApplianceDB ranks 1 repair for this code, led by “Reset, then have the control board checked”. That top fix is professional-only work, not a DIY job, involving the control board. Severity is classified as stop failure — the appliance halts until the fault clears.

Ranked repair steps

1. Reset, then have the control board checked

Cut power at the plug or breaker for at least five minutes, restore it and start a timed dry cycle; if F01 returns, a technician should inspect the main control board and its wiring and test the door switch.

professional only · basis: cost ascending

Remedy source: ApplianceCodeHub — Whirlpool Dryer F01 Guide (fix layer)

Provenance: facts re-derived from a disclosed repair reference — ApplianceCodeHub — Whirlpool Dryer Error Codes. Meanings and steps are original paraphrase; nothing is reproduced verbatim.

Whirlpool Dryer — Error Code F01

Ranked repair steps

1. Reset, then have the control board checked

Related error codes