Whirlpool Dryer — Error Code F30

Q: How do I fix the F30 error on a Whirlpool dryer?

Try first: Clean the lint screen and restore airflow. Unplug the dryer, clean the lint screen, straighten or clear the vent hose and the exterior vent hood, then run briefly and check airflow at the outside vent; if F30 persists, have the full vent run cleaned and the exhaust thermistor tested.

Airflow is restricted in the venting system.

brand Whirlpool appliance Dryer market US component exhaust vent category ventilation severity degraded

ApplianceDB ranks 1 repair for this code, led by “Clean the lint screen and restore airflow”. That top fix is an easy DIY job, involving the exhaust vent. Severity is classified as degraded — the appliance keeps running but not correctly.

Ranked repair steps

1. Clean the lint screen and restore airflow

Unplug the dryer, clean the lint screen, straighten or clear the vent hose and the exterior vent hood, then run briefly and check airflow at the outside vent; if F30 persists, have the full vent run cleaned and the exhaust thermistor tested.

easy · basis: cost ascending

Remedy source: ApplianceCodeHub — Whirlpool Dryer F30 Guide (fix layer)

Provenance: facts re-derived from a disclosed repair reference — ApplianceCodeHub — Whirlpool Dryer Error Codes. Meanings and steps are original paraphrase; nothing is reproduced verbatim.

Whirlpool Dryer — Error Code F30

Ranked repair steps

1. Clean the lint screen and restore airflow

Related error codes