Beko Washer — Error Code E01 (UK)

Q: How do I fix the E01 error on a Beko washer?

Try first: Check the door and reset. Close the door until it latches fully, clear anything caught in it, and power off for about five minutes before retrying.

The machine is not detecting the door as closed and locked.

brand Beko appliance Washer market UK component door interlock category door_lock severity stop failure

ApplianceDB ranks 2 repairs for this code, led by “Check the door and reset”. That top fix is an easy DIY job, involving the door interlock. Severity is classified as stop failure — the appliance halts until the fault clears.

Ranked repair steps

1. Check the door and reset

Close the door until it latches fully, clear anything caught in it, and power off for about five minutes before retrying.

easy · basis: cost ascending

Remedy source: ApplianceCodeHub — Beko Washer E01 Guide (fix layer)

2. Replace the door lock

If the error persists, have the interlock switch tested for continuity and the door lock assembly replaced with the model-specific OEM part.

professional only · basis: cost ascending

Remedy source: ApplianceCodeHub — Beko Washer E01 Guide (fix layer)

Provenance: facts re-derived from a disclosed repair reference — Whitegoods Help — Beko Washing Machine Error Codes. Meanings and steps are original paraphrase; nothing is reproduced verbatim.